5 Steps to the Best Journey of Your Life

  by MeFOTO Blog 5 Steps to the Best Journey of Your Life

How to Pack for the Most Epic Adventure Ever

For many, Havasupai is one of those once-in-a-lifetime destinations, so when you go, you really want to make the most of it. It's a twenty-mile roundtrip hike, and most people choose to camp out for several nights. Not only was I trying to pack warm (overnight lows were in the 30s), but I had a whopping 18 pounds of camera gear. So…how do I stuff everything I need into a 65L backpacking bag? Here are some of my secrets...

1. Lay everything out

This should always be the first step. Nothing looks more terrifying than seeing the entire floor of your living room plastered with camera equipment, camp gear and clothes, so this helps make the process of removing certain items a no brainer. While we’re on the subject of clothes, try to pick synthetic pieces that dry quickly. Whether you’ve gone swimming or you found a spot to hand wash your pitted-out shirts, this can allow you to easily cut your “wardrobe” in half.

Going minimal with your gear makes adventures like this much more fun. And these were just some of the highlights from our trip...

2. Pick items that can serve multiple purposes

Lightweight dry bags are essential for wet and wild adventures, but they also make great storage bags if you’re planning on hanging your food. And if you’re backpacking, forget inflatable pillows — I always fold up my Big Agnes Shovelhead puffy and use a clean shirt as a pillowcase. I have a pair of synthetic Lululemon pants that I can wear as pajama bottoms — or layer over a pair of leggings if I get cold. A rain cover plus a bag of dirty laundry can work as a cushion, so if you’re looking to cut down your weight, simple techniques like these are key to packing light.

"Don't listen to TLC. DO go chasing waterfalls."

"Don't listen to TLC. DO go chasing waterfalls."

3. And then…remove 1/3 of everything you’ve initially packed

I asked around on social media, and one man suggested this. It seemed like a scary number, especially if you’re like me and you get cold and hangry easily. However, he was right! When you get back and see how much stuff you didn’t use (on this trip, it was a pair of leggings, a tee, a tank, half of my toiletries, a snack bar, a bag of dried fruit and my 20,000 mAh portable power pack), you’ll realize this isn’t so much of a stretch.

Wonder what the weight limit is on this bridge?

Wonder what the weight limit is on this bridge?

4. Invest in the right gear

Whether it’s an anti-gravity backpacking bag or the lightest, sturdiest tripod on the market (I brought my MeFOTO GlobeTrotter Air on this trip), doing your research and picking the best gear for your adventures will always pay off. When every ounce and inch counts, you don’t want to be dealing with a heavy tripod, so I chose the Air because it’s 3.2 pounds and 12.2 inches long, and I could stick it anywhere in (or on) my bag. I could set up my Canon 5DMIII and 24-70mm f2.8 lens on rocky cliffs and fire off long exposures, and it handled just as well as my carbon fiber RoadTrip Classic, which is the same weight but a few inches longer. I did use a two-second timer when shooting LEs, but I usually do that anyway — especially if there is wind or wobbly ground involved.

The small but sturdy GlobeTrotter Air

The small but sturdy GlobeTrotter Air

5. Budget some room for a splurge item

If you’ve really removed one third of what you were planning on bringing, this is where you’re allowed to throw an item back into the mix. My splurge item on this trip was a three-pound day pack that would accommodate a tripod, a liter of water, snacks, extra layers and all my camera gear. I knew I didn’t want to lug my 65L bag around during day hikes, and while I wasn’t stoked about the extra weight at first, it ended up being the best decision of the trip.

Sure, you don’t need a hammock, but once you plop down on the rocky ground at camp, that extra pound of weight doesn’t seem so bad. 

Sure, you don’t need a hammock, but once you plop down on the rocky ground at camp, that extra pound of weight doesn’t seem so bad. 

 And psst! If you want a discount on one of MeFOTO's awesome and lightweight tripods, plug in the LIZSAVE10 code at checkout on their website.


Around the Olympics with the New Globetrotter Air

  by MeFOTO Blog

The warm and dry summer months have come and gone. For the Pacific Northwest, where I live, that means the rainy season is here. And it’s here for many, many months. But as my Seattleite friends and I like to say: if you don’t get outdoors when it’s raining, you won’t get outdoors.

For the holidays, my family was visiting us from the Midwest, where I grew up and went to school. We brainstormed outdoor adventures here in Washington State, despite a very rainy weather forecast. We decided on a classic American road trip around the entire Olympic Peninsula, a large arm of beautiful land, over 3500 square miles, across the Puget Sound from Seattle.

The Olympic Peninsula has it all: rugged mountains and age-old glaciers, pristine lakes and wild rivers, thick rainforests and rugged coastlines. The opportunities for fun are endless.

We left Seattle before sunrise, caught the first ferry across the Puget Sound, and then drove off the ferry and back onto land. Jumping onto Highway 101, we started our circular journey around the Peninsula.

Our first stop was Lake Crescent, a can’t-miss stop for any road trip around the Olympics. As we drove up to this deep, long lake, known for its brilliant blue waters, we looked up to find magical clouds dancing over the surrounding mountains tops. The forecasted unfavorable weather was resulting in some dramatic scenes and visuals, as it often does.

Moody weather above Lake Crescent, Olympic Peninsula.

Moody weather above Lake Crescent, Olympic Peninsula.

We parked our car along Lake Crescent’s shoreline and stepped out to stretch our legs. I ran to the water’s edge to take in the lakeside views. Pulling out my camera, I tested out my new blue MeFOTO Globetrotter Air tripod. Using the redesigned tripod legs, you can unlock, adjust, and re-lock the legs with just two twists, making for quick setup and adjustments. I shot images from a variety of perspectives and angels, including at water level. I’ve used the classic Globetrotter for several years, and will continue to do so, but the Globetrotter Air tripod has become an essential piece of my gear kit. Being surprisingly stable for an ultra-lightweight tripod (it’s just over 3 pounds), there’s no hesitation to bring it along on a hike or any trip I take.

Using the new MeFOTO Globetrotter Air tripod at Lake Crescent.

Using the new MeFOTO Globetrotter Air tripod at Lake Crescent.

After soaking up the views at a moody Lake Crescent, we jumped in the car, and hit the road again. Continuing on Highway 101, we reached the town of Forks, and eventually our next stop, the Hoh Rainforest. The Hoh, one of the largest temperate rainforests in the country, is truly one of a kind.

The rain kept falling, as it was at Lake Crescent, but we still hiked a loop through the Hoh rainforest. We took in the colorful abundance of flora and fauna.

A mossy green giant in the Hoh Rainforest.

A mossy green giant in the Hoh Rainforest.

Wrapping up our hike in the Hoh, we headed southwest toward the Pacific coast, hoping to make our last stop of the day: Ruby Beach.

The day’s rainy weather had been matching the rainy forecast, so we didn’t expect to see much of a sunset at Ruby Beach. But, to our surprise, as we drove up to the coast, we found a big break in the sky. We couldn’t believe our eyes. Stepping out of the car and onto the beach, we witnessed our first sight of sunlight and blue sky of the day. Our hopes were up.

Ruby Beach is known for its on- and off-shore sea stacks (various rock formations), which can make great subjects and elements in photo composition. As the sky lit up with warm light and color, I captured a variety of images with my camera and Globetrotter Air. Using the new Air tripod, and taking advantage of its ability to get very low to the ground, I could focus on the textures on the beach floor, in addition to the views in the distance and overhead. 

Exploring photo compositions at Ruby Beach.

Exploring photo compositions at Ruby Beach.

In addition to its many sea stacks, Ruby is also known for its beautiful sunsets.  With the last remaining light, I set up my Globetrotter Air to shoot a photo timelapse of the waves and sea stacks. I started the timelapse, and left my tripod to itself, as I joined my family for a celebratory beverage on makeshift driftwood benches.

Taking in the day’s last light at Ruby Beach, as my Globetrotter Air shoots a photo timelapse of the waves and sea stacks.

Taking in the day’s last light at Ruby Beach, as my Globetrotter Air shoots a photo timelapse of the waves and sea stacks.

After the sunset ended, we left Ruby Beach and drove another hour in the darkness down the coast, to where we’d stay for the night.

Settling into our home for the night, I peaked outside once more to find a sky full of stars. We all stepped outside to sit and admire the night sky, thankful to be together in a beautiful place. And because the night sky was too beautiful to witness only with the naked eye, I made sure to set up my Globetrotter Air for a long exposure night shot, which revealed some amazing colors and clouds.

A sky full of stars off of Washington’s Pacific coastline.

A sky full of stars off of Washington’s Pacific coastline.

Although our day had started with rain and clouds, it had ended with a beautiful sunset and a starry night. Knowing the next morning we’d complete our circular drive around the Peninsula and return to Seattle, we soaked up every last moment of our trip with smiles on our faces, and plenty of laughs.

Follow Scott's Adventures on his Website , Instagram , Facebook , Twitter , and Snapchat (@scott_kranz).


Ideal Exposure with Histograms & Filters

  by Jay Patel Ideal Exposure with Histograms & Filters

Let face it, there is no such thing as a perfect exposure. Sure, you can get close sometimes, but more often than not, you have to make tradeoffs in order to do so. By using your knowledge of histograms and filters, however, you can achieve an exposure that is just about ideal.


So, when I see breathtaking images like this one, my first question is usually something like: How did the photographer choose such a perfect exposure for this scene? Or is it heavily Photoshopped?

Backlit images like this one are almost always difficult to expose. You have to deal with an extreme dynamic range of light, and that makes it extremely difficult to capture accurate colors and details in every part of the image. When I shot this photo, I used a combination of information from my histogram and GND filters to get as close to a perfect exposure as possible.

Under Exposed Scene – Yellowstone National Park, WY (USA)

Under Exposed Scene – Yellowstone National Park, WY (USA)

Exposed for Shadows – Yellowstone National Park, WY (USA)

Exposed for Shadows – Yellowstone National Park, WY (USA)

When I first started shooting this scene, I intentionally underexposed the image, as you can see on the left. I knew that I could process the image later and recover the shadow details in Photoshop; however, the resulting image would be too noisy.

Instead of choosing this approach, I decided to keep a close eye on my histogram and adjust my exposure until the shadow areas had sufficient detail and the highlights were not completely blown out, as seen in the image on the right. The result was much better.

Now I was closer to the image I wanted, but the the colors in the sky and the details in the highlights were still pretty washed out. To get my exposure closer to perfection, my next step was to add a soft GND filter. So how could I determine which strength of GND filter to use?

1-Stop Soft GND Filter – Yellowstone National Park, WY (USA)

1-Stop Soft GND Filter – Yellowstone National Park, WY (USA)

2-Stop Soft GND Filter – Yellowstone National Park, WY (USA)

2-Stop Soft GND Filter – Yellowstone National Park, WY (USA)

Once again, I had to make a tradeoff. The first image was taken with a 1-stop soft GND filter. As you can see, the exposure for the sky looks nearly perfect; however, the highlights are still a bit overexposed, washing out some of the details. My first instinct was to use a stronger GND filter to restore the highlight details, but by using a 2-stop GND filter, the sky and the mountains got unnaturally dark. Ultimately, I decided to go with a 1-stop filter and apply minor tweaks in post-processing the RAW image.

So, my ideal exposure for this scene was achieved by using my knowledge of histograms and choosing the right GND filter. To help you master these skills for yourself and finally leave the guesswork out of choosing an exposure, we are offering our Histogram Exposed course as part of our May 2016 InFocus Deals. This course takes you into the field with us, where we will teach you how to read and use the histogram on the back of your camera step-by-step. It also includes real-life case studies that will show you how to follow our simple, 4-step workflow so you can start exposing your own images with confidence.

In addition to this great course, our InFocus Deals include a wonderful variety of eBooks and video tutorials from some of the best landscape photographers in the world. For a limited time, we're excited to bring this handpicked selection of resources to you at an astounding 89% discount. You're not going to find a better way to improve your fieldwork and post-processing skills at a better price.

May 2106 InFocus Deals - Sale Price $49 (Reg. Price: $450, 89% Off)

May 2106 InFocus Deals - Sale Price $49 (Reg. Price: $450, 89% Off)


10 Steps to Shoot the Stars: Your Guide to Astrophotography - Scott Kranz

  by MeFOTO Blog

1. Know your camera. First things first, familiarize yourself with your camera and its settings. Is your camera sufficiently powerful to shoot at night? Does it have the basic functionality needed for a good night shot? Check to make sure you can manually adjust focus, shutter speed, aperture, and ISO (each addressed below). And a wide-angle lens is always helpful to capture the vast night sky.

2. Grab a bombproof tripod. The right camera, without more, isn’t enough. You need stability in the form of a solid tripod. Why? Because a single exposure can be upwards to 30 seconds in length, and perfect stillness is required. Have a tripod that is plenty sturdy, given the weight of your camera and any external forces (such as the wind). I currently use a MeFOTO Globetrotter Carbon Fiber tripod .

3. Find your spot. To photograph the stars, you’ll need to get away from most artificial light pollution (from cities and large towns). Head into the wilderness where the stars shine brighter. If you already plan on hiking, backpacking, or camping in a remote area, you should be set, assuming clear skies are in the forecast.

The heart of the North Cascades in Washington State is far from most artificial light pollution present. Settings: 25 secs, f/2.8, ISO 2500. Shot with MeFOTO Globetrotter.

The heart of the North Cascades in Washington State is far from most artificial light pollution present. Settings: 25 secs, f/2.8, ISO 2500. Shot with MeFOTO Globetrotter.

4. Focus on the stars. Once you find your spot with camera and tripod in hand, you need to turn to the camera itself. To vividly capture tacksharp stars, you will first need to set your camera lens to manual focus (as opposed to autofocus). Then, manually focus “on infinity.” Often lenses have an infinity marking (the symbol ∞) to dial to.

5. Nail your shutter speed. To capture starlight in a photograph, your shutter speed will need to be significantly longer than daytime shots 10 seconds, 20 seconds, or even 30 seconds in length. As a rule of thumb, if there is little or no moonlight or light pollution, start with a 20, 25, or 30 second exposure. One warning, though: depending on your lens focal length, too long of an exposure may produce star “trails.” The more you zoom in the greater star movement your camera will capture. Try a wider focal length (16mm to 24mm) to keep the stars tack sharp, even with a 30 second exposure.

If there’s plenty of light pollution on the horizon, try a quicker shutter speed, such as 10 or 15 seconds. Settings: 15.0 sec, f/2.8, ISO 4000. Shot with MeFOTO Globetrotter.

If there’s plenty of light pollution on the horizon, try a quicker shutter speed, such as 10 or 15 seconds. Settings: 15.0 sec, f/2.8, ISO 4000. Shot with MeFOTO Globetrotter.

6. Find the right aperture. Your camera’s aperture (the “Fnumber”) concerns the size of the shutter’s opening, which allows more or less light in during the exposure. The larger or wider the aperture, the smaller the “Fnumber.” For a night shot, set a wider aperture, that is a low “Fnumber,” to let in the most starlight. An Fnumber of f/2.8 or lower works well in the dark of night.

7. Adjust your ISO. The last primary setting, ISO, concerns your camera sensor’s sensitivity to light. The higher the ISO, the more light it will capture. But take note: when you increase the ISO, you also increase the level of “noise” in the photo, impacting the quality of the image. For starters, try an ISO between 2000 to 4000 depending on your camera and the degree of darkness.

8. Let your tripod do the work. After nailing down the camera settings, let your tripod maintain perfect stillness for the entire exposure. To increase stability, you can always hang additional weight, such as your pack, from the spring loaded hook located in the bottom of the tripod’s center column (available on MeFOTO tripods). Also, because even your finger pressing the shutter button can create slight camera shake, use a two second timer to take the shot!

Using a 10 second timer and the sturdy MeFOTO Globetrotter, you can capture an epic night time “selfie

Using a 10 second timer and the sturdy MeFOTO Globetrotter, you can capture an epic night time “selfie

9. Trial and error is a good thing. After you test out your initial camera settings, double check the image for focus and lighting. Are your stars tack sharp? Is the photo too dark or too light? If anything is off, adjust your focus or settings accordingly, and try again!

10. Experiment and have fun. Once you meet the goal of nailing down the right settings and capturing tack-sharp stars, the next step is to simply experiment. For example, you can get creative with artificial light in the foreground. Use a headlamp, a flashlight, or lantern. To mute or more evenly distribute the light, cover it with a white cloth (e.g., a shirt or a bandana).

A popular subject to use when backpacking is your tent. Use of a dim headlamp or other artificial light can give the tent a warm glow to your shot. Settings: 30 secs, f/2.8, ISO3200. But, above all, have fun exploring the visuals only the starry night sky can offer!

A popular subject to use when backpacking is your tent. Use of a dim headlamp or other artificial light can give the tent a warm glow to your shot. Settings: 30 secs, f/2.8, ISO3200.

But, above all, have fun exploring the visuals only the starry night sky can offer!

  Follow Scott's Adventures on his Website , Instagram , Facebook , Twitter , and Snapchat (@scott_kranz).

 

Follow Scott's Adventures on his Website , Instagram , Facebook , Twitter , and Snapchat (@scott_kranz).


Match Your Favorite Decade - Build Your Very Own MeFoto Roadtrip Tripod

  by MeFOTO Blog

Be the first to design your very own Aluminum MeFOTO RoadTrip Tripod. There are over 792 combinations! Custom build your own by choosing your favorite colors. 

You can start from scratch or start with an inspiration from our RoadTrip Gallery. You can choose from Donatello, Rebel, Fruit Punch, Halloween, T-Stark, B Banner, Ireland, Thriller, Mardi Gras, Plum, Limeaid, Chic and many many more. 

Purchase yours right now for $249 and the shipping is FREE!

Go to www.mefoto.com/byo to build your own today!